Skip to content
GWB Machine Tools

LISSMAC Metal Processing

LISSMAC SBM-L G1S2

Deburring and edge rounding on both sides, up to 2 m wide

Enquire NowTalk to an Engineer
LISSMAC SBM-L G1S2 wide-format two-sided deburring machine

Overview

Deburring and edge rounding on both sides, up to 2 m wide

The SBM-L G1S2 is the wide-format machine in the two-sided SBM line, built in 1000, 1500 and 2000 mm working widths. It deburrs and rounds edges on both faces of parts up to 50 mm thick in a single pass, and lifts spotting off the sheet surface at the same time. Each processing unit can be adjusted or switched on and off electrically, so the machine can be set to the job rather than the job to the machine.

The widest range of applications in the SBM line

Three working widths and independently controlled units make the SBM-L the most adaptable machine in the range — it will handle a 2 m plate and a small bracket without a mechanical changeover.

  • Compact design
  • Energy saving
  • SMART-GRINDING approved
  • Fast positioning of all units
  • Quick tool change
  • Up to 2 m working width
  • Uniform tool wear
  • Widest range of applications

What it changes on the shop floor

  • Deburring and edge rounding of parts up to 50 mm thick
  • Removal of spots from the sheet metal surface
  • Processing both faces at once removes the need to turn heavy parts and run them a second time
  • Simultaneous deburring and edge rounding of interior and exterior contours
  • Dry operation
  • Simple, intuitive operation
  • Processing units can be individually adjusted or switched on and off electrically
  • Maximum productivity while maintaining machining quality
  • Cross-machining guarantees optimum tool use over the entire working width
  • Faster, simpler tool change in just a few minutes
  • Modular, compact design in a smaller footprint
  • Improved work environment — less dust, dirt and noise
  • Optional SMART features: automatic tool-wear compensation, automatic sheet-thickness measurement, bar code scanner and more

Options

  • Tool wear compensation SBM-L Siemens S7
  • Bar code scanner for SBM Siemens S7
  • Wireless thickness caliper ME 5000 (Siemens S7)
  • ID-key switch (for Siemens S7 PLC)
  • Special moulding for processing of small parts

Technical data

SpecificationSBM-L 1000 G1S2SBM-L 1500 G1S2SBM-L 2000 G1S2
Working width max.1000 mm1500 mm2000 mm
Workable material thickness0.5 – 50 mm0.5 – 50 mm0.5 – 50 mm
Load300 kg/rm300 kg/rm300 kg/rm
Voltage400 V, 50 Hz / 480 V, 60 Hz400 V, 50 Hz / 480 V, 60 Hz400 V, 50 Hz / 480 V, 60 Hz
Network structure3~ PEN / 3~ PE+N3~ PEN / 3~ PE+N3~ PEN / 3~ PE+N
Total current consumption43.7 A / 40.8 A43.7 A / 40.8 A43.7 A / 40.8 A
Total power19.2 kW / 20.4 kW19.2 kW / 20.4 kW19.2 kW / 20.4 kW
Insulation classIP 42IP 42IP 42
Infinitely variable feed speed0 – 4 m/min0 – 4 m/min0 – 4 m/min
Weight2500 kg2800 kg3200 kg
Dimensions (W/D/H)2800/1500/1800 mm3300/1500/1800 mm4000/1500/1800 mm

LISSMAC / 10.2021 — subject to technical change without notice.

GWB engineers servicing sheet metal fabrication machinery

Experience since the 1960s

Expert Advice and Servicing

Our years of experience in the sheet metal manufacturing and engineering business stretches back to the 1960s. This means you receive expert advice and service from experienced engineers who understand the needs of your business. GWB Machine Tools is Australia's sole distributor for LVD quality machinery, Lissmac handling and processing machines, MSS nitrogen generators and Kohler leveling machines.

Service engineers inBrisbaneSydneyMelbournePerthWellington
Learn More

Get In Touch

Contact Us

We work to find the service solution that fits you - and offer the technology and services to protect your investment and build your success.

Service hotline
1300 010 486(AU)
0800 492 685(NZ)
+61 1300 010 486(intl)

Service engineers in Brisbane · Sydney · Melbourne · Perth · Wellington

Send us a message

CallEnquire